Section 4
Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- 50-70410-002 Rev. A
4-6
Setting the
Administrator
Password (cont.)
T
O SET OR MODIFY THE ADMINISTRATOR PASSWORD
:
1.
From the
Main Window
, click on
Settings
, and
then click on
Names and Passwords
.
2.
Click on
ADMIN
in the left-hand box and then
type in the desired password in the
Password
box.
If you are changing an existing administrator
password to no password, you must first click
inside the
Password
box, but then leave the
Password
box blank. A blank (no password) will
be recorded. The
ADMIN
name cannot be
modified or deleted.
3.
Click on
Add /Update
to add the new
administrator password to the list.
4.
Click on
Update Printer
to send the new
password information to the printer. The system
will ask you to verify the new
ADMIN
password
by retyping the new password in the
Verification
Window
. Type in the new administrator
password, and then click on
OK
. A notification
screen will appear stating that the password
information was sent to the selected printer. Click
on
OK
to proceed.
All previous password
information in the printer will be overwritten
.
Names & Passwords
ADMIN
Add / Update
File Help
Clear
Update Printer
ADMIN
Delete
OK
Verification
Administrator Password has been changed.
Please verify the NEW Administrator
Password entered.
Cancel
Enter New Password:
NOTE: TROY Security Printers do not send data back to the Printer Utility. Therefore, if an incorrect administrator
password is entered in the main window, none of the password information settings will be accepted by the
printer, and the TROY Printer Utility will not provide notification of the error.
