Trox Technik FKRS-EU, Installation And Operating Manual

Page: 102 / 176

1 FKRS-EU
2.4 Fire batt with ablative coating
3.4 Timber stud wall (also timber panel construc-
tions), cladding on both sides
4.1 Solid ceiling slab / solid floor
6.5 Mineral wool (depending on wall construction)
6.10 Ablative coating around the perimeter,
d = at least 2.5 mm
6.19 Mineral wool > 1000 °C, > 80 kg/m³,
thickness = 20 mm, leave out the actuator and
release mechanism; inspection openings must
remain accessible
6.20 Sleeve (can be ordered separately)
6.24 Elastomeric foam (flame-resistant, non-dripping)
The following applies in Germany: For notes on
the use of elastomeric foams, see
Ä
7 .
7.7 Timber stud, min. 60
×
80 mm or
min. 60
×
60 mm with F60
7.10 Trim panels (fire-resistant)
7.11 Trim panels, double layer, staggered joints
7.12 Trim panels, wood sheet, at least 600 kg/³
7.13a Cladding, fire-resistant
7.13b Cladding, wood sheet, at least 600 kg/³
7.17 Trimmer, wooden beam min. 60
×
80 mm or
min. 60
×
60 mm with F60
* 6.19, 6.20 or 6.24 as an alternative
** Installation near the floor analogous to
– See table
Ä
102
Note: The class of performance of depends on 6.10* (see details to ).
Lightweight partition wall with timber support structure
NW
[mm]
Fire resistance prop-
erties
to
Coating s2
[mm]
Detail
Installation side
A
Operating side
B
100 – 200 EI 90 S – – 10 – 600 ,
100 – 315 EI 90 S – x 10 – 600 ,
100 – 200 EI 120 S – x 40 – 600 ,
100 – 315 EI 120 S x x 40 – 600 ,
100 – 315 EI 60 S – – 10 – 600 ,
100 – 315 EI 30 S – – 10 – 600 ,
100 – 315 EI 30 S – – 10 – 600 ,
Installation
Lightweight partition walls with timber support ... > Dry mortarless installation with fire batt
Fire damper Type FKRS-EU 102