Triumph Daytona 955i, Service Manual

Page: 90 / 375

1. Downpipe to Head Fixings
gai
V
1. Oil Cooler to Radiator Mounting
T1WIIMUI MPII
CRANKSHAFT/RODS/PISTONS 6
30. Using new seals at the cylinder head end, refit the
exhaust system as described in the fuel system
section.
35. Align the oil cooler bracket to the crankcase and
tighten the fixing to 9 Nm.
2. Silencer Mounting
31. Refit the radiator as described in the cooling
system section.
32. Align the thermostat housing to the engine,
connect and secure hoses as follows;
• radiator top hose at the radiator,
• engine top hose at the engine,
• bottom hose at the radiator and water pump,
• bypass hose at the radiator.
1. Radiator Top Hose
2. Bypass Hose
3. Engine Top Hose
4. Bypass Hose (rear)
33. Refit the coolant drain plug and tighten to 13 Nm.
34. Refit the oil cooler to the radiator and tighten the
fixings to 9 Nm.
2. Oil Cooler to Crankcase Bracket
36. Using new washers, on both sides of both banjo
bolts, refit the oil cooler pipes to the sump.
Tighten the banjo bolts to 25 Nm.
37. Fill the engine with oil of the correct grade and
viscosity. (See specification section for details).
38. Refit the airbox as described in the fuel system
section, and secure the thermostat housing to the
airbox.
39. Refill the cooling system as described in the
cooling system section.
40. Refit the fuel tank as described in the fuel system
section.
41. Refit the battery to the battery box.
42. Reconnect the battery positive (red) lead first.
43. Refit any bodywork previously removed.
44. Remove the motorcycle from the paddock stand
and place on the side stand.
6.9