Triumph Adler LP 218 Instruction Handbook Manual Download Page 46

Page: 46 / 237

2-19

Chapt

ing-Up

Setting-Up

For USB Interface

Note

Turn on your computer and start up Windows.

Turn on the printer.

Check that Windows has finished starting up and that the printer
is ready.

Connect one end of the interface cable to the USB port of the
computer.

Connect the other end of the interface cable to the USB interface
connector on the back of the printer.

Note

◆

This printer cannot be connected with a USB cable to a computer run-
ning Windows 95 or Windows NT 4.0.

◆

If Windows does not detect the new device, leave the printer on, unplug
both ends of the USB interface cable, and then reconnect it.

Summary of Contents for LP 218














































































































































































































































Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands

Triumph Adler LP 218, Instruction Handbook Manual

Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands