Triumph Adler LP 218 Instruction Handbook Manual Download Page 175

Page: 175 / 237

5-8

Cleaning the Printer

Chapt

tenanc

Cleaning the Printer

Dust, dirt, and paper debris on the outer surfaces and inside the printer
can interfere with printer performance. Clean the printer regularly.

Note

Cleaning the Outside of the Printer

■

Wipe the outside of the printer with a soft cloth moistened with a
neutral, household detergent.

ATTENTION

◆

The fusing unit inside the printer can become very hot during opera-
tion. Do not touch the area to avoid injury.

◆

Use a soft cloth to clean the printer. Never use abrasives or corrosive
detergents.

◆

Wait for at least 10 minutes after the printer has been turned off and make
sure that the fusing unit has cooled before cleaning the interior of the
printer.

Fusing unit

Summary of Contents for LP 218














































































































































































































































Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands

Triumph Adler LP 218, Instruction Handbook Manual

Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands