Triumph Adler LP 218 Instruction Handbook Manual Download Page 148

Page: 148 / 237

4-65

Chapt

ter

Dri

Using the Control Panel

The Control Panel has 5 tabs, which you can use to control the follow-
ing items.

See online help for full details about using these tabs to make settings.

Note

Common Buttons

The following buttons appear at the bottom of all the tabs.

Click to exit the Control Panel, saving any changes made.

Cancel

Click to exit the Control Panel, discarding any changes made.

Set Default

Click to return Control Panel settings to their defaults.

Help

Click to view on-line help.

About

Click to view copyright and version information.

◆

The following information is common to Windows 95, Windows 98,
Windows Me, Windows NT 4.0 and Windows 2000.

Summary of Contents for LP 218














































































































































































































































Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands

Triumph Adler LP 218, Instruction Handbook Manual

Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands