Triumph Adler LP 218 Instruction Handbook Manual Download Page 142

Page: 142 / 237

4-59

Chapt

ter

Dri

Using the Status Display

The status display displays information about the current status of the
computer’s local printer.

Starting Up the Status Display

This section describes how to start up the Status Display, which keeps
you informed of the status of the printer at all times.

Important!

Note

◆

Before starting up the Status Display, make sure that the printer is con-
nected to your computer and turned on.

◆

Before starting up the Status Display, be sure to exit the Control Panel.

◆

If you checked the

Setup to Start Status Display automatically

box in

the installation procedure, the Status Display will start up automatically
each time you start up your computer.

Summary of Contents for LP 218














































































































































































































































Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands

Triumph Adler LP 218, Instruction Handbook Manual

Search results

Summary of Contents for LP 218

Reviews:

Related manuals for LP 218

Brands by name

Popular brands