Triumph Adler DC 2045, Instruction Handbook Manual

Page: 25 / 244

Section 3 PREPARATIONS
3-5
(5) Loading paper into the Side Feeder (an optional
drawer[cassette] only available for 55 cpm copiers)
Up to 4000 sheets of 11" x 8
1/2
" or A4 size standard copy paper
(75 g/m 2 – 80 g/m 2 ) or color paper can be loaded into the optional
Side Feeder.
1 Hold down the paper plate up/down switch located on the
right side of the Side Feeder.
NOTES
• If there is no paper in the Side Feeder, the paper plate inside the
Side Feeder will already have been lowered automatically to its
lowermost position.
• If the right cover to the Side Feeder is open, the paper plate will not
move even if you press this switch.
2
Open the right cover to the Side Feeder.
NOTE
If you open the upper cover as well, it will be easier to load paper into
the Side Feeder.
3 Align the paper flush against the left side of the paper plate,
and then set the paper in the Side Feeder.
IMPORTANT!
• Make sure there are no folds, etc., in the paper you load into the
Side Feeder. Folds, etc., can cause paper jams.
• DO NOT load more paper than is indicated by the label located on
the inside of the Side Feeder (shown as
1
in the illustration).
• When you are loading paper into the Side Feeder, make sure that
the side to be copied onto is facing upward. (The copy side is the
side facing upward when the package is opened.)
4 Close the upper cover, if necessary, and then close the right
cover.
NOTE
If you will not be using the copier for a prolonged period of time,
remove all paper from the Side Feeder and seal it in its original
packaging in order to protect it against moisture.
1