Section 2 NAMES OF PARTS
2-4
2. Operation panel
7
6
5
4
9
1
8
3
2
$
%
^
&
*
0
@ !
#
1
[Start] key & indicator lamp
(Press this key when the lamp in that key is lit green and you want
to start copying.)
2
[Stop/Clear] key
(Press this key when you want to stop copying or change the
number of copies to be made.)
3
[Reset] key
(See “Initial mode” on page 2-5.)
4
[Energy Saver] key & indicator lamp
(Press this key when you want to turn the energy-saving preheat
mode ON. Press the same key again to turn the preheat mode
OFF.)
5
[Interrupt] key & indicator lamp
(Press this key to light the lamp in that key when you want to
perform interrupt copying. See page 4-9.)
6
[Management] key
(When copy management is turned ON, press this key after
copying in order to return to the department ID-code entry display.)
7
[
] (default setting) key
(Press this key when you want to perform default settings as well
as those related to copy management, etc.)
8
Keypad
(Use these keys when you want to set the number of copies to be
made or enter other values.)
9
Touch panel
(This panel displays such information as operation procedures,
machine status, and the various function keys.)
0
Brightness adjustment control dial
(Turn this dial when you want to adjust the brightness of the touch
panel.)
!
[Copier] key & indicator lamp
(Press this key to light the lamp in that key when you want to use
the copier functions of this machine.)
@
[Printer] key & indicator lamp
(Press this key when you want to use the optional printer functions
of this machine. The lamp in that key will light when the machine is
in the printer operation mode. The indicator to the left of the key
will either light green or orange, or will flash, depending upon the
status of the machine.)
#
[Scanner] key & indicator lamp
(Press this key when you want to use the optional scanner
functions of this machine. The lamp in that key will light when the
machine is in the scanner operation mode. The indicator to the left
of the key will either light green or orange, or will flash, depending
upon the status of the machine.)
$
[Auto Selection] key & indicator lamp
(Press this key to light the lamp in that key when you want to use
the auto selection mode. See page 5-30.)
%
[Job Build] key & indicator lamp
(Press this key to light the lamp in that key when you want to use
the job build mode. See page 5-58.)
^
[Repeat Copy] key & indicator lamp
(Press this key to light the lamp in that key when you want to use
the repeat copy mode. See page 5-43.)
&
[Job Queue] key & indicator lamp
(Press this key to light the lamp in that key when you want to use
the output management functions of the copier. See page 6-20.)
*
[Document Management] key & indicator lamp
(Press this key to light the lamp in that key when you want to use
the document management functions of the copier.
See page 6-1.)
Summary of Contents for DC 2045
