LYNX Plus Programming Manual Rev 2.1c
Page
91
Program 05-20-IP : System Timing Parameters – 20
05-20-IP SYS PAR
0 0 0 0 0 0 0 0
IP = Item Pointer (01-08)
Value for each Item
IP
Value
Default
Item Description
01
0-1
0= Disable
VMU Mailbox Delete All Messages
02
0-6
0=
DISA No Digits Dialed Destination
03
0-1
1=20 Boxes
Number of Available Voice Mail Boxes
04
0-
0=
Reserved
05
0-
0=
Reserved
06
0-
0=
Reserved
07
0-
0=
Reserved
08
0-
0=
Reserved
01. VMU Mailbox Delete All Messages
This option enables or disables a message within the VMU that prompts a user to delete all messages
within their own mailbox. When enabled, during a mailbox’s main menu, the optional prompt “Press 5 to
delete all messages,” will be played. Pressing the digit 5 will clear all message, new and old that are
present in the mailbox. If disabled, this prompt will not be played. U.S. Voice prompt version for the VMU
must be 5116 or higher. Older versions do not have the prompt in the prompt library.
02. DISA No Digits Dialed (End of Message) Destination
This parameter controls how calls are handled if the caller dials no digits at the DISA main greeting.
A setting of 0 will cause the VMU to either disconnect the caller or transfer the caller to the appropriate
operator as programmed on 05-07-04.
A setting of 1 through 6 will route the caller to one of the six virtual extensions in the system, so that the
caller can leave a message.
Note:
By default, only the first two Virtual extensions are configured with mailboxes.
1= Virtual mailbox 41
2= Virtual mailbox 42
3= Virtual mailbox 43
4= Virtual mailbox 44
5= Virtual mailbox 45
6= Virtual mailbox 46
03. Number of Available Voice Mail Boxes
(Added in software A20q. Not available in earlier versions)
Lynx will support either 8 mailboxes, with storage for 20 one minute messages or 20 mailboxes, with
storage for 8 one minute messages. This parameter determines how mailboxes are partitioned for Lynx.
0 = 8 mailboxes, 20 messages of 1 minute per box.
1 = 20 mailboxes, 8 messages of 1 minute per box.
2 = 8 mailboxes, 10 messages of 2 minutes per box.
When configured with 8 mailboxes, the default locations for these mailboxes will be:
4 Electronic stations on main board (extensions 11~14) receive mailboxes, 01, 02, 03, 04.
2 SLT stations on main board (extension 19~20) receive mailboxes 05, 06.
2 Virtual stations (extensions 41~42) receive mailboxes 07, 08.
When configured with 20 mailboxes, the default locations for these mailboxes will be:
4 Electronic stations on main board (extensions 11~14) receive mailboxes, 01, 02, 03, 04.
Summary of Contents for Lynx DK6 Series
