Page
54
05. Toll Access Code
It is the first dialling digit that will be checked as an effective Toll Call or not. This has no effect on toll
control within the system. It is only used to notify SMDR that a call is Toll Call or not. Refer to Program
14-01-03. Record Local Calls. The Toll Access Code can be any one digit (0,1,2,3,4,5,6,7,8,9).
06. Station Numbering Plan
This parameter assigns the number of digits used for the station numbering plan. 2, 3, or 4 digits may be
used.
IP \ Value
2
3
4
05-03-06
2 Digits
3 Digits
4 digits
07. Internal Dial Tone Pattern
System will initial different Dial tone to Analog phone when it is off hook for notifying its setting situation.
There are four different situations could be identified as follow:
Intercom: Normal situation without setting to DND, CFW or MW.
DND: Do Not Disturb.
CFW: Call Forwarding
MW: Message Waiting (Some left message on the phone).
There are three different Dial Tone patterns:
Steady: Continue Dial Tone
2-Burst (Stutter Dial Tone): 250ms on / 250ms off / 250ms on / 1250ms off
3-Burst: 250ms on / 250ms off / 250ms on /250ms off / 250ms on / 750ms off
Notes:
1) If the parameter is set to 0 or 1 then analog phone will receive the 2-Burst tone if call forward or DND
has been set for that extension.
2) Value 2 (and 6) is particularly designed for use when there is an external Voice Mail system
connected to the system, as some Voice mail units have problems with the broken dial tone.
3) Value 6 will also provide what is known as Stutter dial tone to extensions when they are left a
message, useful where phones do not have a message light. When this is enabled as well as MW
light to handsets by other methods the phones with messages will receive both Message light and
stutter dial tone.
IP
Value
Intercom
DND
CFW
MW
05-03-07
0
Steady
3-Burst
3-Burst
Steady
05-03-07
1
2-Burst
3-Burst
3-Burst
2-Burst
05-03-07
2
Steady
Steady
Steady
Steady
05-03-07
3
2-Burst
2-Burst
2-Burst
2-Burst
05-03-07
4
Steady
3-Burst
3-Burst
2-Burst
05-03-07
5
2-Burst
3-Burst
3-Burst
Steady
05-03-07
6
Steady
Steady
Steady
2-Burst
05-03-07
7
2-Burst
2-Burst
2-Burst
Steady
08. Door Phone Ring Pattern
This parameter allows for different ring patterns for the Door Phone. This Parameter will also affect the
ACP phone. If this mode is set to = 0 then the ACP will follow the extension ringing frequency otherwise it
will follow settings in this Mode.
IP \ Value
0
1-8
9
05-03-08
Continuous ring
Same Ringing - 1 to 8 as DK handset
Background Music
(Program 05-08-08)
Summary of Contents for Lynx DK6 Series
