Page
138
03. Automatic Answer Capability (Keyphone) / Internal CLIP (Caller ID) Function
For Digital Key Telephone
This parameter if enabled will automatically switch on the microphone of the station if it receives an
intercom call. This setting is independent of whether the system is set to voice or ring signalling for
intercom calls.
IP
Value
Value Description
46-stn-03
0
No
46-stn-03
1
MIC permanently on
46-stn-03
2
MIC will switch on for Intercom calls
For Single Line Telephone (Connected to LYNX-SLU or SLT port on MBU):
This enables system to send internal and external CLIP(Caller ID) signals to the single line telephone
IP
Value
Value Description
46-stn-03
0
Disable CLIP sending to SLT
46-stn-03
1
Enable SDMF (number without name) CLIP sending to SLT
04. DISA/ISDN In Dial Recall Capability
If this parameter is enabled then when a DISA or ISDN In dial call rings an extension but the station is
busy or does not answer (depending on setting) after the voice message announcing the status of the
station is heard then the system will recall the operator after the assigned DISA transfer time. Using this
settings 1 to 3 the called station will continue to ring until the console answers the call. Using this Settings
5 to 7 the call will ring the station for 1 cycle (Mode 05-08-06) and then recall to the console and cease to
ring the called station. If the parameter is set to 0 then the call will stay at the station until answered or
terminated. If the extension is a Fax or Modem on ISDN DID then the setting must be 4 to prevent Fax or
Modem calls being sent to an operator if the extension is busy.
IP
Value
Value Description
46-stn-04
0
No Recall to Operator
46-stn-04
1
Recall to Operator when called station is No Answer.
46-stn-04
2
Recall to Operator when called station is Busy. Camp on called station.
46-stn-04
3
Recall to Operator when called station is No Answer/Busy. Camp on called station.
46-stn-04
4
ISDN In dial calls ringing a busy station will receive busy signal.
46-stn-04
5
Recall to Operator when called station is No Answer. No Camp on function.
46-stn-04
6
Recall to Operator when called station is Busy. No Camp on function.
46-stn-04
7
Recall to Operator when called station is No Answer/Busy. No Camp on function.
46-stn-04
8
ISDN In dial calls, recall to Operator when called station is busy.
05. Maximum Re-Transferred Times
This feature allows the user or the automatic attendant console to re-transfer the same call for the number
of times set in this parameter.
IP \ Value
0
1
2
3
4
5
6
7
8
9
unit
46-stn-05 No limit
6
7
8
9
10
11
12
13
14
times
Summary of Contents for Lynx DK6 Series
