LYNX Plus Programming Manual Rev 2.1c
Page
115
03. Trunk Transmit Gain
This parameter adjusts the TKU interface’s transmit gain to adapt to different CO loop resistance. For long
loop situation where the transmit audio may be low. This parameter will allow send loudness to be
boosted.
IP \ Value
0
1
2
3
4
5
6
7
8
9
unit
29-01-03
0
1
2
3
4
5
6
7
8
9
db
04. Set Ring Frequency (DK Handsets)
This feature allows each trunk to ring at DK handsets with its own individual ring frequency and override
the frequency set by the user for all calls. These values are valid for DK-6 and DK-7 telephone sets.
IP \ Value
0
1-8
29-01-03 As per the key phone’s ring setting. Use the ringing frequency 1~8 of key phone as the trunk’s ring.
Note:
In addition to the 8 available ring tones, the system also
supports up to 6 tunes on DK-6
telephone sets only.
These settings
will not provide melodies on DK-7 telephone sets
. The valid
settings for those are:
d = Song 1
p [HOLD] = Song 4
* = Song 2
T [MSG] = Song 5
# = Song 3
_ [TRF] = Song 6
05. Allow Audible Ring for Incoming Calls
This feature allows either some or all stations which are ring assigned in Program Mode 01 or 02 to
receive the audible ring signal when a trunk rings at the station. If the audible signal is disabled the station
will still be able to answer a call by lifting the handset only, if they are ring assigned in Program Mode 01 or
02
0 = All stations assigned in Mode 01 & 02 will receive audible signal for an incoming call
1 = Only the first station assigned in Mode 01 & 02 will receive audible signal for an incoming call.
Other ring assigned stations will still be able to answer a call by lifting the handset only
2 = The first 2 stations assigned in Mode 01 & 02 will receive audible signal for an incoming call.
The other ring assigned stations will still be able to answer a call by lifting the handset
only.
3 to 8............
9 = The first 9 stations assigned in Mode 01 & 02 will receive audible signal for an incoming call. Other
ring assigned stations will still be able to answer a call by lifting the handset only.
06. 1A2 Emulation
When an extension is connected to a trunk, another extension can make a conference by press the busy
trunk button if 1A2 Emulation is available. The actual operation of this parameter is dependant upon
interaction with Form 78-ST-03, described elsewhere in this manual.
IP \ Value
0
1
29-01-06
No Trunk Access
Access Conditional upon 78-STN-03
Summary of Contents for Lynx DK6 Series
