Page
170
Program 95-tk-IP : Trunk Specifications – 3
95-tk-IP TK SPEC
0 0 0 0 0 0 0 0
Tk=Trunk No. (01-12), IP=Item Pointer
(
01-08)
Value for each Item
IP
Value
Default
Item Description
01
0-1
0=Disable
Detect Fax Signal
02
0-1
0=
Reserved
03
0-8
0=
Reserved
04
0-8
0=No
DISA & ECF Lunch Time Enable
05
0-3
0=
Reserved
06
0-9
6=
Duet (Faxibility) Setting
07
0-5
0=
Reserved
08
0-5
0=
Reserved
This program permits each trunk line to be assigned different parameters.
01. Detect Fax signal
This parameter is used to enhance Fax Auto Detection Switch. Our system will detect incoming FAX CNG
tone and transfer it to an assigned FAX SLT port.
Frequently, incoming FAX calls mistakenly detect human voice as FAX tone and start transmitting prior to
being transferred to a FAX machine. In other cases, The sound of an auto attendant greeting may mask
the CNG tone of an incoming FAX call, so the Lynx does not accurately recognize the call as an incoming
FAX.
If set to 0, there will be no attempts to recognize FAX tone on incoming calls.
If set to 1, the trunk will detect FAX tone, but the Auto Attendant message will play immediately.
If set to 2 (or higher), the system will delay playback of Auto attendant greeting to give the FAX detection
“clean audio” to allow detection of incoming CNG tone.
If set to >0 and no FAX tone is detected, the call will proceed according to system programming to
processing of a voice call.
Definition of parameter:
IP
Value
Value Description
95-tk-01
0
The trunk won’t detect the fax signal.
95-tk-01
1
Trunk will detect the FAX CNG tone during company greeting and route the FAX
call automatically if CNG is detected.
95-tk-01
2
Delay the company greeting 5 seconds to allow detection of FAX CNG tone.
95-tk-01
3
Delay the company greeting 6 seconds to allow detection of FAX CNG tone.
..
…..
95-tk-01
9
Delay the company greeting 12 seconds to allow detection of FAX CNG tone.
If the programmed trunk detects FAX CNG tone, the system will automatically transfer this call to the
assigned FAX extension (refer to Program Mode 43-CN-02=T). If the programmed trunk does not detect
CNG tone during the above setting timer, the company greeting will then play for a voice call.
Other programming modes related to this setting:
a. 43-CN-02 = T (Fax port) => press [MSG] ---- (SLT Port)
b. 95-TK-01 = 0/1 => disable/enable Fax Tone Detection
c. 35-TK-04= 3 Enable DISA feature
d. 46-ST-08= 1 SLT Ring Cadence Settings
e. 05-01-04= 0 DISA answer delay time
Summary of Contents for Lynx DK6 Series
