Installation - Zone Sensors
62
UNT-SVX07E-EN
Installation Considerations
Location
Reference the wall-mounted zone sensor dimensions in
Figure 48
. Position the sensor on an inside wall three to
five feet above the floor and at least 18 inches from the
nearest outside wall. Installing the sensor at a lower height
may give the advantage of monitoring the temperature
closer to the zone, but it also exposes the sensor to airflow
obstructions. Ensure that air flows freely over the sensor.
Figure 43.
Digit 30 = F, G, J or K and Digit 31 = Y
Split-mounted zone sensor, unit-mounted
fan mode and wall-mounted setpoint dial
Figure 44.
Digit 30 = F, G, J or K and Digit 31 = Z
Unit-mounted zone sensor
Figure 45.
Digit 30 = F, G, J or K and Digit 31 = 4
Wall-mounted wired display sensor with
setpoint adjustment
X13511527-01
Wall-mounted sensor
X13790849-01
Unit-mounted sensor
X13651467-02
Comm module
X13790844-01
Unit-mounted zone sensor
X13790886-04
Wall-mounted wired display sensor
Figure 46.
Digit 30 = F, G, J or K and Digit 31 = 6
Wall-mounted wireless temperature sensor
(WZS) (setpoint adjustment, no fan speed
adjustment) and unit-mounted receiver
1
Note:
1
When the Wireless Communication Interface (WCI) is ordered, the
wireless receiver (X13790860-02) is replaced by the flush mount
WCI X13790902-01
Figure 47.
Digit 30 = F, G, J or K and Digit 31 = 7
Wall-mounted wireless display sensor (WDS)
and unit-mounted receiver
1
Note:
1
When the Wireless Communication Interface (WCI) is ordered, the
wireless receiver (X13790860-02) is replaced by the flush mount
WCI X13790902-01
X13790821-01
Wall-mounted wireless sensor
X13790860-02
Unit mounted receiver
X13790822-04
Wall-mounted wireless
display sensor
X13790860-02
Unit mounted receiver
