Installation - Zone Sensors
UNT-SVX07E-EN
71
Displaying Setpoint or Temperature
You can configure the sensor to display either the
temperature (default) or setpoint. To select either option:
1.
Verify that the sensor is in operating mode and at the
home screen.
2. Press the up and down arrows for 3 seconds. The arrow
indicates setpoint display, as shown in
Figure 62
.
Table 25. Configuration options for wireless display sensors
Setting
Configuration Options
Temperature
• Choose Fahrenheit or Celsius
• Choose the degree resolution
(whole degrees, half degrees, or
tenths of degrees).
Setpoint
System
Fan
Note:
Not all fan options are available
for all systems.
Occupancy (timed override)
.
.
.
.
.
.
No
setpoint
Single
setpoint
No system
options enabled
Auto/Off/Low
Med/High
Auto/Off/
Low/High
Auto/Off
Off/High (On)
Off/Low/High
Off/Low/
Med/High
No fan options
enabled
Occupancy
enabled
Occupancy
disabled
Figure 62.
Displaying setpoint or temperature
Temperature
Setpoint
Arrow indicates
setpoint display
