SNMP Commands
4-113
4
snmp-server user
This command adds a user to an SNMP group, restricting the user to a specific
SNMP Read, Write, or Notify View. Use the
no
form to remove a user from an SNMP
group.
Syntax
snmp-server user
username
groupname
[
remote
ip-address
] {
v1
|
v2c
|
v3
[
encrypted
] [
auth
{
md5
|
sha
}
auth-password
[
priv des56
priv-password
]]
no snmp-server user
username
{
v1
|
v2c
|
v3
|
remote
}
•
username
- Name of user connecting to the SNMP agent.
(Range: 1-32 characters)
• groupname -
Name of an SNMP group to which the user is assigned.
(Range: 1-32 characters)
•
remote
- Specifies an SNMP engine on a remote device.
•
ip-address
- The Internet address of the remote device.
•
v1
|
v2c
|
v3
- Use SNMP version 1, 2c or 3.
•
encrypted
- Accepts the password as encrypted input.
•
auth
- Uses SNMPv3 with authentication.
•
md5
|
sha
- Uses MD5 or SHA authentication.
•
auth-password
- Authentication password. Enter as plain text if the
encrypted
option is not used. Otherwise, enter an encrypted password.
(A minimum of eight characters is required.)
•
priv des56
- Uses SNMPv3 with privacy with DES56 encryption.
•
priv-password
- Privacy password. Enter as plain text if the
encrypted
option is not used. Otherwise, enter an encrypted password.
Table 4-40 show snmp group - display description
Field
Description
groupname
Name of an SNMP group.
security model
The SNMP version.
readview
The associated read view.
writeview
The associated write view.
notifyview
The associated notify view.
storage-type
The storage type for this entry.
Row Status
The row status of this entry.
Summary of Contents for TL-SG5426 -
