System Management Commands
4-27
4
•
password
- password for this privilege level.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
• The default is level 15.
• The default password is “super”
Command Mode
Global Configuration
Command Usage
• You cannot set a null password. You will have to enter a password to change
the command mode from Normal Exec to Privileged Exec with the
enable
command (page 4-19).
• The encrypted password is required for compatibility with legacy password
settings (i.e., plain text or encrypted) when reading the configuration file
during system bootup or when downloading the configuration file from a TFTP
server. There is no need for you to manually configure encrypted passwords.
Example
Related Commands
enable (4-19)
authentication enable (4-72)
IP Filter Commands
management
This command specifies the client IP addresses that are allowed management
access to the switch through various protocols. Use the
no
form to restore the
default setting.
Syntax
[
no
]
management
{
all-client
|
http-client
|
snmp-client
|
telnet-client
}
start-address
[
end-address
]
•
all-client
-
Adds IP address(es) to the SNMP, web and Telnet groups.
• http-client
-
Adds IP address(es) to the web group.
• snmp-client
-
Adds IP address(es) to the SNMP group.
Console(config)#enable password level 15 0 admin
Console(config)#
Table 4-11 IP Filter Commands
Command
Function
Mode
Page
management
Configures IP addresses that are allowed management access GC
4-27
show management
Displays the switch to be monitored or configured from a
browser
PE
4-28
Summary of Contents for TL-SG5426 -
