TP-Link TL-SG5426 -, Installation Manual

Page: 312 / 499

Authentication Commands
4-71
4
authentication login
This command defines the login authentication method and precedence. Use the no
form to restore the default.
Syntax
authentication login {[ local ] [ radius ] [ tacacs ]}
no authentication login
• local - Use local password.
• radius - Use RADIUS server password.
• tacacs - Use TACACS server password.
Default Setting
Local
Command Mode
Global Configuration
Command Usage
• RADIUS uses UDP while uses TCP. UDP only offers best effort
delivery, while TCP offers a connection-oriented transport. Also, note that
RADIUS encrypts only the password in the access-request packet from the
client to the server, while encrypts the entire body of the packet.
• RADIUS and logon authentication assigns a specific privilege level
for each user name and password pair. The user name, password, and
privilege level must be configured on the authentication server.
• You can specify three authentication methods in a single command to indicate
the authentication sequence. For example, if you enter “ authentication login
radius tacacs local ,” the user name and password on the RADIUS server is
verified first. If the RADIUS server is not available, then authentication is
attempted on the server. If the server is not available,
the local user name and password is checked.
Example
Related Commands
username - for setting the local user names and passwords (4-25)
Console(config)#authentication login radius
Console(config)#