TP-Link TL-SG5426 -, Installation Manual

Page: 245 / 499

Command Line Interface
4-4
4
Showing Commands
If you enter a “?” at the command prompt, the system will display the first level of
keywords for the current command class (Normal Exec or Privileged Exec) or
configuration class (Global, ACL, Interface, Line or VLAN Database). You can also
display a list of valid keywords for a specific command. For example, the command
“
show ? ” displays a list of possible show commands:
Console#show ?
access-group Access groups
access-list Access lists
bridge-ext Bridge extension information
calendar Date and time information
class-map Display class maps
cluster Display cluster
dns DNS information
dot1q-tunnel QinQ content
dot1x 802.1x content
garp GARP properties
gvrp GVRP interface information
history History information
hosts Host information
interfaces Interface information
ip IP information
lacp LACP statistics
line TTY line information
log Login records
logging Logging setting
mac MAC access list
mac-address-table Configuration of the address table
management Show management information
map Maps priority
mvr Show mvr interface information
policy-map Display policy maps
port Port characteristics
port-channel Port Channel
protocol-vlan Protocol-VLAN information
public-key Public key information
pvlan Private VLAN information
queue Priority queue information
radius-server RADIUS server information
running-config Information on the running configuration
snmp Simple Network Management Protocol statistics
sntp Simple Network Time Protocol configuration
spanning-tree Spanning-tree configuration
ssh Secure shell server connections
startup-config Startup system configuration
system System information
tacacs-server TACACS server settings
users Information about terminal lines
version System hardware and software versions
vlan Virtual LAN settings
Console#show