Command Line Interface
4-124
4
Example
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters
[
interface
]
interface
•
ethernet
unit
/
port
-
unit
- Stack unit. (Range: Unit 1)
-
port
- Port number. (Range: 1-26)
•
port-channel
channel-id
(Range: 1-4)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see “Showing Port
Statistics” on page 3-95.
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic information:
Port type: 100TX
Mac address: 00-12-CF-12-34-61
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full,
Broadcast storm: Enabled
Broadcast storm limit: 500 packets/second
Flow control: Disabled
Lacp: Disabled
Port security: Disabled
Max MAC count: 0
Port security action: None
Current status:
Link status: Up
Port operation status: Up
Operation speed-duplex: 100full
Flow control type: None
Console#show interfaces status vlan 1
Information of VLAN 1
MAC address: 00-12-CF-12-34-56
Console#
Summary of Contents for TL-SG5426 -
