Quality of Service
3-159
3
Policy Rule Settings
- Class Settings -
•
Class Name
– Name of class map.
•
Action
– Shows the service provided to ingress traffic by setting a CoS, DSCP, or
IP Precedence value in a matching packet (as specified in Match Class Settings on
3-155).
•
Meter
– The maximum throughput and burst rate.
-
Rate (kbps)
– Rate in kilobits per second.
-
Burst (byte)
– Burst in bytes.
•
Exceed Action
– Specifies whether the traffic that exceeds the specified rate will
be dropped or the DSCP service level will be reduced.
•
Remove Class
– Deletes a class.
- Policy Options -
•
Class Name
– Name of class map.
•
Action
– Configures the service provided to ingress traffic by setting a CoS, DSCP,
or IP Precedence value in a matching packet (as specified in Match Class Settings
on 3-155).
(Range - CoS: 0-7, DSCP: 0-63, IP Precedence: 0-7, DSCP: 0-63)
•
Meter
– Check this to define the maximum throughput, burst rate, and the action
that results from a policy violation.
-
Rate (kbps)
– Rate in kilobits per second. (Range: 1-100000 kbps or maximum
port speed, whichever is lower)
-
Burst (byte)
– Burst in bytes. (Range: 64-1522)
•
Exceed
– Specifies whether the traffic that exceeds the specified rate or burst will
be dropped or the DSCP service level will be reduced.
-
Set
– Decreases DSCP priority for out of conformance traffic. (Range: 0-63).
-
Drop
– Drops out of conformance traffic.
•
Add
– Adds the specified criteria to the policy map.
Summary of Contents for TL-SG5426 -
