TP-Link TL-SG5426 -, Installation Manual

Page: 208 / 499

Multicast Filtering
3-165
3
Command Attributes
• VLAN ID – ID of configured VLAN (1-4094).
• Immediate Leave – Enable or disable IGMP immediate leave for the selected
VLAN.
Web – Click IGMP Snooping, IGMP Immediate Leave.
Figure 3-98 IGMP Immediate Leave
CLI – This example enables IGMP immediate leave for VLAN 1 and then displays
the current IGMP snooping status.
Displaying Interfaces Attached to a Multicast Router
Multicast routers that are attached to ports on the switch use information obtained
from IGMP, along with a multicast routing protocol such as DVMRP or PIM, to
support IP multicasting across the Internet. These routers may be dynamically
discovered by the switch or statically assigned to an interface on the switch.
You can use the Multicast Router Port Information page to display the ports on this
switch attached to a neighboring multicast router/switch for each VLAN ID.
Command Attributes
• VLAN ID – ID of configured VLAN (1-4094).
• Multicast Router List – Multicast routers dynamically discovered by this switch or
those that are statically assigned to an interface on this switch.
Console(config)#interface vlan 1
Console(config-if)#ip igmp snooping immediate-leave
4-204
Console(config-if)#end
Console#show ip igmp snooping
4-203
Service Status: Enabled
Querier Status: Disabled
Leave proxy status: Enabled
Query Count: 2
Query Interval: 125 sec
Query Max Response Time: 10 sec
Router Port Expire Time: 300 sec
Immediate Leave Processing: Enabled on VLAN 1,
IGMP Snooping Version: Version 2
Console#