Command Line Interface
4-86
4
Example
show dot1x
This command shows general port authentication related settings on the switch or a
specific interface.
Syntax
show dot1x
[
statistics
] [
interface
interface
]
•
statistics
- Displays dot1x status for each port.
• interface
•
ethernet
unit
/
port
-
unit
- Stack unit. (Range: Unit 1)
-
port
- Port number. (Range: 1-26)
Command Mode
Privileged Exec
Command Usage
This command displays the following information:
•
Global 802.1X Parameters
– Shows whether or not 802.1X port
authentication is globally enabled on the switch.
•
802.1X Port Summary
– Displays the port access control parameters for
each interface, including the following items:
- Status
– Administrative state for port access control.
- Operation Mode
– Dot1x port control operation mode (page 4-83).
- Mode
– Dot1x port control mode (page 4-82).
- Authorized
– Authorization status (yes or n/a - not authorized).
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout tx-period 300
Console(config-if)#
Summary of Contents for TL-SG5426 -
