Configuring the Switch
3-40
3
Configuring Remote SNMPv3 Users
Each SNMPv3 user is defined by a unique name. Users must be configured with a
specific security level and assigned to a group. The SNMPv3 group restricts users to
a specific read, write, and notify view.
To send inform messages to an SNMPv3 user on a remote device, you must first
specify the engine identifier for the SNMP agent on the remote device where the
user resides. The remote engine ID is used to compute the security digest for
authenticating and encrypting packets sent to a user on the remote host.
Command Attributes
•
User Name
– The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
•
Group Name
– The name of the SNMP group to which the user is assigned.
(Range: 1-32 characters)
•
Engine ID
– The engine identifier for the SNMP agent on the remote device where
the remote user resides. Note that the remote engine identifier must be specified
before you configure a remote user. (See “Specifying a Remote Engine ID” on
page 44.)
•
Model
– The user security model; SNMP v1, v2c or v3.
•
Level
– The security level used for the user:
-
noAuthNoPriv
– There is no authentication or encryption used in SNMP
communications. (This is the default for SNMPv3.)
-
AuthNoPriv
– SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
-
AuthPriv
– SNMP communications use both authentication and encryption (only
available for the SNMPv3 security model).
•
Authentication
– The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
•
Privacy
– The encryption algorithm use for data privacy; only 56-bit DES is
currently available.
Web
– Click SNMP, SNMPv3, Remote Users. Click New to configure a user name.
In the New User page, define a name and assign it to a group, then click Add to save
the configuration and return to the User Name list. To delete a user, check the box
next to the user name, then click Delete.
Figure 3-30 Configuring Remote SNMPv3 Users
Summary of Contents for TL-SG5426 -
