Line Commands
4-11
4
line
This command identifies a specific line for configuration, and to process subsequent
line configuration commands.
Syntax
line
{
console
|
vty
}
•
console
- Console terminal line.
•
vty
- Virtual terminal for remote console access (i.e., Telnet).
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as “Vty” in
screen displays such as
show users
. However, the serial communication
parameters (e.g., databits) do not affect Telnet connections.
Example
To enter console line mode, enter the following command:
Related Commands
show line (4-18)
show users (4-61)
login
This command enables password checking at login. Use the
no
form to disable
password checking and allow connections without a password.
Syntax
login
[
local
]
no login
local
- Selects local password checking. Authentication is based on the
user name specified with the
username
command.
Default Setting
login local
Command Mode
Line Configuration
Command Usage
• There are three authentication modes provided by the switch itself at login:
Console(config)#line console
Console(config-line)#
Summary of Contents for TL-SG5426 -
