Command Line Interface
4-168
4
Command Usage
• Use the VLAN database command mode to add, change, and delete VLANs.
After finishing configuration changes, you can display the VLAN settings by
entering the
show vlan
command.
• Use the
interface vlan
command mode to define the port membership mode
and add or remove ports from a VLAN. The results of these commands are
written to the running-configuration file, and you can display this file by
entering the
show running-config
command.
Example
Related Commands
show vlan (4-175)
vlan
This command configures a VLAN. Use the
no
form to restore the default settings or
delete a VLAN.
Syntax
vlan
vlan-id
[
name
vlan-name
]
media ethernet
[
state
{
active
|
suspend
}]
no vlan
vlan-id
[
name
|
state
]
•
vlan-id
- ID of configured VLAN. (Range: 1-4094, no leading zeroes)
•
name
- Keyword to be followed by the VLAN name.
-
vlan-name
- ASCII string from 1 to 32 characters.
•
media ethernet
- Ethernet media type.
•
state
- Keyword to be followed by the VLAN state.
-
active
- VLAN is operational.
-
suspend
- VLAN is suspended. Suspended VLANs do not pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
•
no vlan
vlan-id
deletes the VLAN.
•
no vlan
vlan-id
name
removes the VLAN name.
•
no vlan
vlan-id
state
returns the VLAN to the default state (i.e., active).
• You can configure up to 255 VLANs on the switch.
Console(config)#vlan database
Console(config-vlan)#
Summary of Contents for TL-SG5426 -
