Toyota TNS 700 Owner'S Manual Download Page 176

Page: 176 / 178

157

APPENDIX

CAUTION

Do not place anything on the opened

display, as such items may be thrown

about and possibly injure people in

the vehicle during sudden braking or

in an accident.

To reduce the chance of injury in the

case of an accident or sudden stop-

ping while driving, keep the display

closed.

Take care not to jam your hand while

the display is moving. Otherwise,

you could be injured.

NOTICE

Do not obstruct the display while it is

moving. It could damage your naviga-

tion system.

INFORMATION

Under extremely cold conditions, the

display may react slowly or operation

sound may become louder.

To confirm the database version and

disc coverage area

1. Push the “MENU” button.

2. Touch “Map DVD”.

Make sure the version of the database on

this screen.
To display the disc coverage area, touch

“Covered area”

. Confirm the covered area

on the screen.
Contact any authorized Toyota dealer or re-

pairer and most auto parts stores or another

qualified professional, to find out if there is a

more recent update available.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands