Toyota TNS 700 Owner'S Manual Download Page 158

Page: 158 / 178

139

AUDIO SYSTEM

Touch the desired file number. The CD play-

er will start playing the selected file from the

beginning.

By touching this button, the list moves

up by 6 file groups. If this button is touched

when the top page of the list is displayed, the

last page is displayed.

By touching this button, the list moves

down by 6 file groups. If this button is

touched when the last page of the list is dis-

played, the top page is displayed.

“FOLDER”:

The folder list is displayed.

“DETAIL”:

Details of the file currently play-

ing is displayed. This function is available

only when the vehicle is not moving.

Searching for a desired file

While the disc is playing, touch “SCAN”

briefly.

“SCAN” appears on the screen. The CD

player will play the next file in the folder for 10

seconds, then scan again. To select a file,

touch

“SCAN”

once again. If the CD player

reaches the end of the folder, it will continue

scanning from file 1.
After all the files are scanned in one pass,

normal play resumes.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands