Toyota TNS 700 Owner'S Manual Download Page 153

Page: 153 / 178

134

AUDIO SYSTEM

Selecting a desired track

SELECTING A DESIRED TRACK
“SEEK/TRACK” button:

Use for direct ac-

cess to a desired track.
Push the

“ ”

button of

“SEEK/

TRACK”

and repeat until the desired track

number appears on the screen. As you re-

lease the button, the CD player will start play-

ing the selected track from the beginning.

“TRACK LIST”:

The desired track can be

selected from a list. This function is available

only when the vehicle is not moving.
Touch

“TRACK LIST”

. The track list is dis-

played.

Touch the desired track number. The CD

player will start playing the selected track

from the beginning.

By touching this button, the list moves

up by 6 track groups. If this button is touched

when the top page of the list is displayed, the

last page is displayed.

By touching this button, the list moves

down by 6 track groups. If this button is

touched when the last page of the list is dis-

played, the top page is displayed.

Fast forward:

Push the

“ ”

button of

“SEEK/TRACK”

and hold it to fast forward

the disc. When you release the button, the

CD player will resume playing from that posi-

tion.

Reverse:

Push the

“ ”

button of

“SEEK/

TRACK”

and hold it to reverse the disc.

When you release the button, the CD player

will resume playing.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands