Toyota TNS 700 Owner'S Manual Download Page 124

Page: 124 / 178

105

OTHER FUNCTIONS

INFORMATION ITEMS
“ENGINE OIL”:

Replace engine oil

“OIL FILTER”:

Replace engine oil filter

“ROTATION”:

Rotate tyres

“TYRE”:

Replace tyres

“BATTERY”:

Replace battery

“BRAKE PAD”:

Replace brake linings

“WIPER”:

Replace wiper blades

“LLC”:

Replace engine coolant

“BRAKE OIL”:

Replace brake fluid

“ATF”:

Replace ATF (Automatic Transmis-

sion Fluid)

“SERVICE”:

Scheduled maintenance

“AIR FILTER”:

Replace air filter

“PERSONAL”:

New information items can

be created separately from provided ones.

4. Input the conditions.
Notice of “Date”:

The next maintenance

date can be input.

Notice of “Distance”:

The driving distance

until the next maintenance check can be in-

put.

“Delete”:

To cancel the date and distance

conditions.

“Reset”:

To reset the date and distance con-

ditions.

5. Touch “OK”.

The screen then returns to the “Mainte-

nance” screen.

INFORMATION

For scheduled maintenance informa-

tion, please refer to the “Toyota Ser-

vice Booklet” or “Toyota Warranty

Booklet”.

Depending on driving or road condi-

tions, the actual date and distance

may differ from the stored date and

distance in the system.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands