Toyota TNS 700 Owner'S Manual Download Page 131

Page: 131 / 178

112

OTHER FUNCTIONS

To display memos for a specified peri-

od of time

1. Touch “Period” on the “Search List”

screen.

2. Enter the period using the numeral

keys.

The period from January 1, 2005 through De-

cember 31, 2024 can be set for searching.

3. After setting the period, touch “OK”.

The “Memo list” screen will be displayed.

The brightness or contrast of the screen can

be adjusted depending on the brightness of

your surroundings. You can also turn the dis-

play off.

To display the “Display” screen, push the
“DISPLAY” button.

Contrast and brightness adjustment
“Contrast” “+”:

Strengthens the contrast of

the screen.

“Contrast” “–”:

Weakens the contrast of the

screen.

“Brightness” “+”:

Brightens the screen.

“Brightness” “–”:

Darkens the screen.

After adjusting the screen, touch “OK”.

The screen goes off when

“Screen off”

touched. To turn the display screen back on,

push any button such as

“INFO”

, etc. The

selected screen appears.

INFORMATION

When you do not touch any button on

the “Display” screen for 20 seconds,

the previous screen will be displayed.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Screen adjustment

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands