Toyota TNS 700 Owner'S Manual Download Page 123

Page: 123 / 178

104

OTHER FUNCTIONS

When the navigation system is turned on, the

“Information” screen displays when it is time

to replace a part or certain components.

(See page 3.)

1. Push the “INFO” button.

2. Touch “Maintenance”.

3. Touch the desired button.

For details of each touch--screen button, see

“INFORMATION ITEMS” on page 105.

“Delete all”:

To cancel all conditions which

have been inputted.

“Reset all”:

To reset the item which has sat-

isfied a condition.

“Set dealer”:

To register or edit dealer infor-

mation. (See “ — Dealer setting” on page

106.)

“On”

is selected, the system gives mainte-

nance information with the “Information”

screen and voice sound when the system is

turned on. (See page 3.)
If

“Off”

is selected, the “Information” screen

is disabled.
When the vehicle needs to be serviced, the

touch--screen button colour will change to

orange.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Maintenance information —

— Maintenance information

setting

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands