Toyota TNS 700 Owner'S Manual Download Page 26

Page: 26 / 178

BASIC FUNCTIONS

List screen operation

When a list is displayed, use the appropriate

button to scroll through the list.

To shift to the next or previous page.

To scroll up or down one item at a

time.

This expresses a displayed screen

position.

appears to the right of the

item name, the complete name is
too long for the display. Touch
to scroll to the end of the name.
Touch

to scroll to the beginning

of the name.

Sorting

The order of a list displayed on the screen

can be rearranged.

TYPE A

1. Touch “Sort by”.

2. Select the desired sorting criteria.

Sorting criteria are as follows:

“Distance”:

To sort in the order of distance

from your current location.

“Date”:

To sort in the order of the date.

“Category”:

To sort in the order of the cate-

gory.

“Icon”:

To sort in the order of the icons.

“Name”:

To sort in the order by name.

“Attribute”:

To sort in the order by attribute.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands