Toyota TNS 700 Owner'S Manual Download Page 23

Page: 23 / 178

BASIC FUNCTIONS

Memo information

This system notifies about a memo entry. At

the specified date, the memo information will

be displayed when the navigation system is

in operation. The memo information screen

will be displayed every time the system is

turned on.

The memo of the current date can be

viewed by touching “Memo”.

(See “ —

Editing a memo” on page 110.)

To disable this screen, touch “Do not re-

display this message”. This screen goes

off if the screen is not operated for sever-

al seconds.

To prevent this information screen from be-

ing displayed again, touch

“Do not redis-

play this message”

To register a memo information, see “Calen-

dar with memo” on page 108.

This system is operated mainly by the touch--

screen buttons on the screen.

To prevent damage to the screen, lightly

touch buttons on the screen with the fin-

ger. When a button on the screen is

touched, a beep sounds.
Do not use objects other than your finger

to touch the screen.

INFORMATION

If the system does not respond to a

touch on a touch- screen button,

move the finger away from the

screen and then touch it again.

Dimmed touch- screen buttons can-

not be operated.

Wipe off fingerprints using a glass

cleaning cloth. Do not use chemical

cleaners to clean the touch screen.

The displayed image may become

darker and moving images may be

slightly distorted when the display is

cold.

When you look at the screen through

polarized material such as polarized

sunglasses, the screen may be dark

and hard to see. If so, change the

angle of the screen, look at the

screen from different angles, adjust

the screen settings on the “Display”

screen, or take off your sunglasses.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Touch screen operation

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands