Toyota TNS 700 Owner'S Manual Download Page 43

Page: 43 / 178

DESTINATION SEARCH

Push the “DEST” button and the “Des-

tination” screen appears.

You can use one of 12 different methods to

search your destination. (See pages 26

through 42.)

INFORMATION

When searching the destination, the re-

sponse to the touch- screen button may

be slow.

SELECTING THE SEARCH AREA ON THE

DESTINATION SCREEN

1. Touch the search area touch--screen

button on the “Destination” screen to dis-

play a map of the Europe divided into 23

countries.

(For map database information

and updates, see “Map database information

and updates” on page 155.)

2. Touch the button indicating the coun-

try to select a search area.
3. Touch “OK” and the “Destination”

screen returns.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Destination search —

— Selecting the search area

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands