Toyota TNS 700 Owner'S Manual Download Page 63

Page: 63 / 178

DESTINATION SEARCH

To change the route before starting

guidance

ROAD PREFERENCE

1. You can change road preference by

touching “Road preference”.

2. Select the desired road preference by

touching the button.

When searching for a route, the system will

avoid routes when the indicator is off.

3. After choosing the desired road pref-

erence, touch “OK”.

INFORMATION

Even if the “Allow motorway” indica-

tor is dimmed, the route cannot avoid

including a motorway in some cases.

If the calculated route includes a trip

by ferry, the route guidance shows a

sea route. After you travel by ferry,

the current vehicle position may be

incorrect. Upon reception of GPS

signals, it is automatically corrected.

3 ROUTES SELECTION

1. To select the desired route from three

routes, touch “3 routes”.

2. Touch “Quick1”, “Quick2” or “Short”

to select the desired route.
“Quick1”:

Recommended route.

This route is indicated by an light blue line.

“Quick2”:

Alternative route.

This route is indicated by a purple line.

“Short”:

A route by which you can reach the

destination in the shortest distance.

This route is indicated by a green line.

“Info.”:

To display the following information

about each of the 3 routes.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands