Toyota TNS 700 Owner'S Manual Download Page 22

Page: 22 / 178

BASIC FUNCTIONS

On this screen, you can select the language
shown on the screen.

Touch the desired button on the screen.
“GB”:

English

“D”:

German

“F”:

French

“I”:

Italian

“NL”:

Dutch

“E”:

Spanish

“S”:

Swedish

“DK”:

Danish

“N”:

Norwegian

“P”:

Portuguese

If a screen other than for the navigation sys-
tem is displayed, the current screen would
change to the “CAUTION” screen by pushing
the

“MAP/VOICE”

“DEST”

“MENU”

button.

When “I agree” is touched on the

“CAUTION” screen, the map screen will

be displayed.

The “CAUTION” screen will be displayed
when the

“INFO”

button is pushed and

“Language”

is touched. Then select a lan-

guage. (See “Selecting a language” on page
116.)

Maintenance information

This system informs about when to replace

certain parts or components and shows deal-

er information (if registered) on the screen.
When the vehicle reaches a previously set

driving distance or date specified for a

scheduled maintenance check, the “Infor-

mation” screen will be displayed when the

navigation system is in operation.

To disable this screen, touch “Do not dis-

play this message again.”. This screen

goes off if the screen is not operated for

several seconds.

To prevent this information screen from be-

ing displayed again, touch

“Do not display

this message again.”

To register “Maintenance information”, see

“Maintenance information” on page 104.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands