Toyota TNS 700 Owner'S Manual Download Page 130

Page: 130 / 178

111

OTHER FUNCTIONS

It is possible to display a memo list by setting

a condition.

1. Touch “List” on the “Calendar”

screen.

2. Touch the desired search condition to

list the memos.
“This week”:

To display the list of memos for

the current week.

“This month”:

To display the list of memos

for the current month.

“Future”:

To display a list of future memos.

“Past”:

To display the list of past memos.

“All”:

To display the list of all memos.

“Period”:

To display the list of memos for a

specified period. (See page 112.)

3. To delete and/or edit the memo, touch

the desired memo button.
“Del. all”:

To delete all the displayed me-

mos.
A message will be displayed.

4. To delete, touch “Yes”. To cancel the

deletion, touch “No”.

05CY_AVENSIS LCA AVN_EE

(L/O 0703)

Finish

— Memo list

Summary of Contents for TNS 700



















































































































































































Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands

Toyota TNS 700, Owner'S Manual

Search results

Summary of Contents for TNS 700

Reviews:

Related manuals for TNS 700

Brands by name

Popular brands