Toyota Highlander 2020 Page 170 Owner'S Manual Download

Page: 170 / 560

170

3-5. Opening, closing the windows and moon roof

HIGHLANDER_U

: If equipped

■

Opening and closing the
electronic sunshade

Opens the electronic sun-

shade

Closes the electronic sun-

shade

: Lightly press either side of the

sunshade switch to stop the elec-
tronic sunshade partway.

■

Tilting the panoramic moon
roof up and down

Tilt up (press)

If the panoramic moon roof is open,
pressing the switch closes it up to
the tilt-up position.

If the shade is closed past the
half-open position when the switch
is pressed, it will open up to the

half-open position.

To stop operation partway, quickly
slide and release the switch again.

Tilt down (press and hold)

The panoramic moon roof can
be tilted down only when it is in
the tilt-up position.

■

Opening and closing the
panoramic moon roof

Open (slide backward)

To stop operation partway, quickly
slide and release the switch again.

Close (slide forward)

The panoramic moon roof stops
at the tilt-up position.

Slide and hold the switch again
to fully close the panoramic
moon roof.

To stop operation partway, quickly
slide and release the switch again.

Panoramic moon roof

Use the overhead switches
to operate the panoramic
moon roof and electronic
sunshade.

Operating the panoramic
moon roof

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands