Toyota Highlander 2020 Page 76 Owner'S Manual Download

Page: 76 / 560

2-1. Instrument cluster

HIGHLANDER_U

:These lights turn on when the

engine switch is turned to ON to

indicate that a system check is

being performed. They will turn

off after the engine is started, or

after a few seconds. There may

be a malfunction in a system if a

light does not come on, or turn

off. Have the vehicle inspected

by your Toyota dealer.

:This light illuminates on the

multi-information display.

:7-inch display only: This light illu-

minates on the multi-information

display.

:This light comes on when the

system is turned off.

:4.2-inch display only: These

lights turn on when the engine

switch is turned to ON to indicate

that a system check is being per-

formed. They will turn off after

the engine is started, or after a

few seconds. There may be a

malfunction in a system if a light

does not come on, or turn off.

Have the vehicle inspected by

your Toyota dealer.

:7-inch display only

The indicators inform the driver

of the operating state of the

Rear passengers’ seat
belt reminder light

(



P.453)

Tire pressure warning
light

(



P.454)

(orange)

LTA indicator

(



P.454)

(flashes)

Stop & Start cancel indica-
tor

*3, 4, 5

(if equipped)

(



P.454)

(flashes)

Intuitive parking assist
OFF indicator

*1, 4, 6

(if

equipped) (



P.455)

(flashes)

RCTA OFF indicator

*2, 4

(if

equipped) (



P.455)

(flashes)

PKSB OFF indicator

*1, 4, 6

(if equipped) (



P.455)

(flashes or

illumi-

nates)

PCS warning light

(



P.456)

Slip indicator

(



P.456)

(flashes)

(U.S.A.)

Parking brake indicator

(



P.457)

(flashes)

(Canada)

Parking brake indicator

(



P.457)

(flashes)

Brake hold operated indi-
cator

(



P.457)

WARNING

■

If a safety system warning

light does not come on

Should a safety system light such

as the ABS and SRS warning

lights not come on when you start

the engine, this could mean that

these systems are not available to

help protect you in an accident,

which could result in death or seri-

ous injury. Have the vehicle

inspected by your Toyota dealer

immediately if this occurs.

Indicators

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands