manualshive.com logo in svg

Toyota Highlander 2020, Owner'S Manual

Share
Download
Toyota Highlander 2020 Owner'S Manual Download Page 423

423

6-3. Do-it-yourself maintenance

HIGHLANDER_U

6

Maintena

nce

 a

nd 

ca
re

The recommended cold tire 
inflation pressure and tire size 
are displayed on the tire and 
loading information label. 
(

P.499)

Tire valve

Tire pressure gauge

1

Remove the tire valve cap.

2

Press the tip of the tire pres-
sure gauge onto the tire 
valve.

3

Read the pressure using the 
gauge gradations.

4

If the tire inflation pressure is 
not at the recommended 
level, adjust the pressure.
If you add too much air, press 
the center of the valve to 
deflate.

5

After completing the tire infla-
tion pressure measurement 
and adjustment, apply soapy 
water to the valve and check 
for leakage.

6

Put the tire valve cap back 
on.

■

Tire inflation pressure check 
interval

You should check tire inflation pres-
sure every two weeks, or at least 
once a month. Do not forget to 
check the spare.

■

Effects of incorrect tire inflation 
pressure

Driving with incorrect tire inflation 
pressure may result in the following:

●

Reduced fuel economy

●

Reduced driving comfort and poor 
handling

●

Reduced tire life due to wear

●

Reduced safety

●

Damage to the drive train

If a tire needs frequent inflating, 
have it checked by your Toyota 
dealer.

■

Instructions for checking tire 
inflation pressure

When checking tire inflation pres-

Tire inflation pressure

Checking the specified 
tire inflation pressure

Inspection and adjust-
ment procedure

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands