Toyota Highlander 2020 Page 482 Owner'S Manual Download

Page: 482 / 560

482

7-2. Steps to take in an emergency

HIGHLANDER_U

Ensure that the shift lever is
in P and depress the brake
pedal.

Touch the Toyota emblem
side of the electronic key to
the engine switch.

When the electronic key is
detected, a buzzer sounds and the
engine switch will turn to ON.

When the smart key system is
deactivated in customization set-
ting, the engine switch will turn to
ACC.

Firmly depress the brake

pedal and check that

shown on the multi-informa-
tion display.

Press the engine switch
shortly and firmly.

In the event that the engine still
cannot be started, contact your
Toyota dealer.

■

Stopping the engine

Shift the shift lever to P, set the park-
ing brake, and press the engine
switch as you normally do when
stopping the engine.

■

Replacing the key battery

As the above procedure is a tempo-

rary measure, it is recommended
that the electronic key battery be
replaced immediately when the bat-
tery is depleted. (



P.428)

■

Changing engine switch modes

Release the brake pedal and press
the engine switch in step

above.

The engine does not start and
modes will be changed each time
the switch is pressed. (



P.203)

Starting the engine

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands