manualshive.com logo in svg

Toyota Highlander 2020, Owner'S Manual

Share
Download
Toyota Highlander 2020 Owner'S Manual Download Page 367

367

5-5. Using the other interior features

HIGHLANDER_U

5

Interior

 featur

es

5-5.Using the other interior features

The USB charging ports are 

used to supply 2.1 A of electric-

ity at 5 V to external devices.

The USB charging ports are for 

charging only. They are not 

designed for data transfer or 

other purposes.

Depending on the external 

device, it may not charge prop-

erly. Refer to the manual 

included with the device before 

using a USB charging port.

■

Using the USB charging 

ports

On the instrument panel

Open the lid.

Rear of console box

Open the lid.

■

The USB charging ports can be 

used when

The engine switch is in ACC or ON.

■

Situations in which the USB 

charging ports may not operate 

correctly

●

If a device which consumes more 

than 2.1 A at 5 V is connected

●

If a device designed to communi-

cate with a personal computer, 

such as a USB memory device, is 

connected

●

If the connected external device is 

turned off (depending on device)

●

If the temperature inside the vehi-

cle is high, such as after the vehi-

cle has been parked in the sun

■

About connected external 

devices

Depending on the connected exter-

nal device, charging may occasion-

ally be suspended and then start 

again. This is not a malfunction.

Other interior features

USB charging ports

NOTICE

■

To prevent damage to the 

USB charging ports

●

Do not insert foreign objects into 

the ports.

●

Do not spill water or other liq-

uids into the ports.

●

When the USB charging ports 

are not in use, close the lids. If a 

foreign object or liquid enters a 

port may cause a short circuit.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands