Toyota Highlander 2020 Page 443 Owner'S Manual Download

Page: 443 / 560

443

7-1. Essential information

HIGHLANDER_U

Whe

trouble

ises

more, or press it briefly 3

times or more in succession.

Stop the vehicle in a safe

place by the road.



Remove the seat belt first.



If the door can be opened,

open the door and exit the

vehicle.



If the door can not be opened,

open the window using the

power window switch and exit

the vehicle through the win-

dow.



If the window can not be

opened using the power win-

dow switch, remain calm, wait

until the water level inside the

vehicle rises to the point that

the water pressure inside of

the vehicle equals the water

pressure outside of the vehi-

cle, and then open the door

and exit the vehicle.

WARNING

■

If the engine has to be turned

off while driving

Power assist for the brakes and

steering wheel will be lost, making

the brake pedal harder to depress

and the steering wheel heavier to

turn. Decelerate as much as pos-

sible before turning off the engine.

If the vehicle is

trapped in rising water

In the event the vehicle is

submerged in water, remain

calm and perform the fol-

lowing.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands