Toyota Highlander 2020 Page 168 Owner'S Manual Download

Page: 168 / 560

168

3-5. Opening, closing the windows and moon roof

HIGHLANDER_U

Press and hold the “CLOSE”

switch.

The moon roof will close, reopen

and pause for approximately 10 sec-

onds.

Then it will close again, tilt

up and pause for approximately 1

second. Finally, it will tilt down, open

and close.

Check to make sure that the

moon roof is completely closed

and then release the switch.

●

If the moon roof tilts down but then

tilts back up

Stop the vehicle.

Press and hold the “UP” switch

until the moon roof moves into

the tilt up position and stops.

Release the “UP” switch once

and then press and hold the “UP”

switch again.

The moon roof will pause for

approximately 10 seconds in the tilt

up position.

Then it will adjust

slightly and pause for approximately

1 second. Finally, it will tilt down,

open and close.

Check to make sure that the

moon roof is completely closed

and then release the switch.

:If the switch is released at the

incorrect time, the procedure will

have to be performed again from

the beginning.

:If the switch is released after the

above mentioned 10 second

pause, automatic operation will

be disabled. In that case, press

and hold the “CLOSE” or “UP”

switch, and the moon roof will tilt

up and pause for approximately 1

second. Then it will tilt down,

open and close. Check to make

sure that the moon roof is com-

pletely closed and then release

the switch.

If the moon roof does not fully close

even after performing the above

procedure correctly, have the vehi-

cle inspected by your Toyota dealer.

■

Moon roof open warning buzzer

A buzzer sounds and a message is

shown on the multi-information dis-

play when the engine switch is

turned off and the driver’s door is

opened with the moon roof open.

■

Customization

Some functions can be customized.

(



P.515)

WARNING

Observe the following precau-

tions.

Failing to do so may cause death

or serious injury.

■

Opening the moon roof

●

Do not allow any passengers to

put their hands or heads outside

the vehicle while it is moving.

●

Do not sit on top of the moon

roof.

■

Opening and closing the

moon roof

●

The driver is responsible for

moon roof opening and closing

operations.

In order to prevent accidental

operation, especially by a child,

do not let a child operate the

moon roof. It is possible for chil-

dren and other passengers to

have body parts caught in the

moon roof.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands