Toyota Highlander 2020 Page 216 Owner'S Manual Download

Page: 216 / 560

216

4-3. Operating the lights and wipers

HIGHLANDER_U

With the headlights on, push

the lever away from you to

turn on the high beams.

Pull the lever toward you to the

center position to turn the high

beams off.

Pull the lever toward you and

release it to flash the high

beams once.

You can flash the high beams with

the headlights on or off.

AFS (Adaptive Front-lighting

System) secures excellent visi-

bility at intersections and on

curves by automatically adjust-

ing the direction of the light axis

of the headlights according to

vehicle speed and the degree of

the tire’s angle as controlled by

steering input.

AFS operates at speeds of 6 mph

(10 km/h) or higher.

■

Customization

Some functions can be customized.

(



P.515)

NOTICE

■

To prevent battery discharge

Do not leave the lights on longer

than necessary when the engine

is off.

Turning on the high beam

headlights

AFS (Adaptive Front-light-

ing System) (if equipped)

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands