Toyota Highlander 2020 Page 172 Owner'S Manual Download

Page: 172 / 560

172

3-5. Opening, closing the windows and moon roof

HIGHLANDER_U

Slide the shade switch forward

and hold it.

The shade will close then reopen

and pause for approximately10 sec-

onds. Then it will close.

Check to make sure that the

shade is completely closed and

then release the switch.

: If the switch is released at the

incorrect time, the procedure will

have to be performed again from

the beginning.

If the shade continues to close but

then reopens slightly even after per-

forming the above procedure cor-

rectly, have the vehicle inspected by

your Toyota dealer.

■

Panoramic moon roof open

warning buzzer

A buzzer sounds and a message is

shown on the multi-information dis-

play when the engine switch is

turned off and the driver’s door is

opened with the panoramic moon

roof open.

WARNING

Observe the following precau-

tions.

Failing to do so may cause death

or serious injury.

■

Opening and closing the elec-

tronic sunshade

●

Check to make sure that all pas-

sengers do not have any part of

their body in a position where it

could be caught when the elec-

tronic sunshade is being oper-

ated.

●

Do not let a child operate the

electronic sunshade. Closing

the electronic sunshade on

someone can cause death or

serious injury.

■

Opening the panoramic moon

roof

●

Do not allow any passengers to

put their hands or heads outside

the vehicle while it is moving.

●

Do not sit on top of the pan-

oramic moon roof.

■

Opening and closing the pan-

oramic moon roof

●

The driver is responsible for

panoramic moon roof opening

and closing operations. In order

to prevent accidental operation,

especially by a child, do not let a

child operate the panoramic

moon roof. It is possible for chil-

dren and other passengers to

have body parts caught in the

panoramic moon roof.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands