manualshive.com logo in svg

Toyota Highlander 2020, Owner'S Manual

Share
Download
Toyota Highlander 2020 Owner'S Manual Download Page 142

142

3-3. Adjusting the seats

HIGHLANDER_U

2

Stow the second seat belt 
buckles.

3

Pass the outer seat belts 
through the seat belt hangers 
and secure the seat belt 
plates.

This prevents the shoulder belts 
from being damaged.

4

Lower the head restraints to 
the lowest position. (

P.147)

■

Folding down the second 
seats

1

Pull the seatback angle 

adjustment lever 

 or 

 to 

tilt the seatback forward.

Each seatback may be folded sep-

arately.

2

Pull the seatback folding 
lever to unlock the seatback. 
The seatback will be folded 
down.

■

After folding down the sec-
ond seats

Slide the folded second seats 
backward until they lock.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands