Toyota Highlander 2020 Page 119 Owner'S Manual Download

Page: 119 / 560

119

3-2. Opening, closing and locking the doors

HIGHLANDER_U

Before driving

Function

Operation

Speed linked

door locking

function

All doors are auto-

matically locked

when vehicle

speed is approxi-

mately 12 mph (20

km/h) or higher.

Shift position

linked door

locking func-

tion

All doors are auto-

matically locked

when shifting the

shift lever out of P.

Shift position

linked door

unlocking

function

All doors are auto-

matically unlocked

when shifting the

shift lever to P.

Driver’s door

linked door

unlocking

function

All doors are auto-

matically unlocked

when driver’s door

is opened.

Back door

The back door can be

locked/unlocked and

opened/closed by the fol-

lowing procedures.

WARNING

Observe the following precau-

tions. Failure to do so may result

in death or serious injury.

■

Before driving the vehicle

Before driving the vehicle, make

sure that the back door is fully

closed. If the back door is not fully

closed, it may open unexpectedly

while driving, causing an acci-

dent.

■

Caution while driving

●

Keep the back door closed

while driving.

If the back door is left open, it may

hit near-by objects while driving or

luggage may be unexpectedly

thrown out, causing an accident.
In addition, exhaust gases may

enter the vehicle, causing death

or a serious health hazard. Make

sure to close the back door before

driving.

●

Never let anyone sit in the lug-

gage compartment. In the event

of sudden braking, sudden

swerving or a collision, they are

susceptible to death or serious

injury.

■

When children are in the vehi-

cle

●

Do not allow children to play in

the luggage compartment.

If a child is accidentally locked in

the luggage compartment, they

could have heat exhaustion or

other injuries.

Summary of Contents for Highlander 2020

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands

Toyota Highlander 2020, Owner'S Manual

Search results

Summary of Contents for Highlander 2020

Reviews:

Related manuals for Highlander 2020

Brands by name

Popular brands